Panasonic NV-DS15EN - Searching for the End of the Recorded Part on a Cassette (Blank Search)

2.DI8ITAL EFFECT
l.CARO SETUP
4- RECORD t NG SETUP
i. D I SPLAY SETUP
{.OTHER FUNCTIONS
Aijy6 ^
SEARCH ► PHOTO
12tM AUO10 ► STI
^YES
YES
ii
ENGLISH
Searching for the End of the Recorded
Part on a Cassette (Blank Search)
V\fith the Blank Search Function, you can quickly locate the
end of the recorded part on a cassette (or a blank part
between recordings).
1 Press the [MODE] Button until the [VCR] Lamp
lights.
2 Press the [MENU] Button.
The [VCR FUNCTIONS] Main-Menu appears.
3 Turn the [PUSH] Dial to select [PLAYBACK
FUNCTIONS] and then press the [PUSH] Dial.
The [PLAYBACK FUNCTIONS] Sub-Menu appears.
4 Turn the [PUSH] Dial to select [BLANK
SEARCH],
5 Press the [PUSH] Dial to select [YES],
Approximately 1 second before the end of the last
recorded scene, the Movie Camera switches over to the
Still Playback Mode.
•If there is no blank part on a cassette, the Movie Camera
stops at the end of the tape.
•When the Blank Search has finished, you can press the
[MODE] Button until the [CAMERA] Lamp lights, and then
start recording. The new scene is recorded with a smooth
transition from the last to the new scene.
•To cancel the Blank Search before it finishes, press the [ ■ ]
Button.
- 72 -