Panasonic NV-DS15EN - Playing Back on a TV; After Use

Playing Back on a TV
By connecting the Movie Camera to a TV, you can watch
playback of the recorded scenes on the TV screen.
1 Connect the [AV OUT] Socket on the Movie
Camera with the Video and Audio Input
Sockets on the TV.
Use the AV Cable 0 to connect to the TV. If your TV is
equipped with an S*Video Socket, also connect the S-
Video Cable 0
♦ Before connecting, turn off both the Movie Camera and the
TV.
•If a cassette recorded with copyright protection signal Is
played back, the screen becomes black. However, scenes
recorded with this Movie Camera do not contain a copyright
protection signal.
Making the indications Appear on the TV Screen
Press the [OSD] Button 0 on the Remote Controller.
The On-Screen Indications also appear on the TV screen.
After Use
H Close the LCD Monitor.
^ Take out the cassette. (- ♦ 22 )
S Set the [OFF/ON] Switch to [OFF].
^ Remove the Battery and retract the Finder.
Hie)
Attaching the Lens Cap
After use, attach the supplied Lens Cap to the Lens to protect
- 68 -