Panasonic NV-DS15EN - Recording in Dark Places Without any Illumination

ENGLiSH
Recording In Dark Places Without Any
Illumination (O Lux Ntght Vlaw Function)
This function is convenient when you want to record at night
in places without any illumination, for example for observing
the behaviour of nocturnal animals, etc. in this mode, the
Movie Camera emits infrared rays which makes it possible to
record subjects that are invisible to the naked eye.
1 Set the [0 LUX OFF/ON] Switch to [ON] to meke
the [OLUX] Indication appear.
•The built'in lnfra>red Beam Emitters O Be careful
not to cover them with your hand when recording.
•Do not use the 0 Lux Night View Function in brightly lit
places and never aim the Movie Camera against ^e sun, as
this could cause irreparable damage.
•The playback picture of scenes recorded with the 0 Lux
Night View Function will be in black and white.
•If you change the setting of the [0 LUX OFF/ON] Switch
during recording, a switdiing noise Is also recorded.
•When recording with the 0 Lux Night View Function,
changing the selected white balance mode is not possible,
•it is not possible to use any of the Programme AE Modes
when the 0 Lux Night View Mode is activated.
•When using the 0 Lux Night View Function, the subject
should be within 3 metres from the Movie Camera.
•When the automatic focusing is not precise, adjust the focus
manually. 106) (In this case, the Manual Focus Mode is
activated when the [FOCUS] Button ^ Is pressed even
then the Mode Selector Switch Q is set to [AUTO].)
•If you do not want the Tally Lamp to light during recording
using the 0 Lux Night View Function, set [REC LAMP] on
the [OTHER FUNCTIONS] Sub-Menu to [OFF].
•As the iris is fully opened in the 0 Lux Night View Mode,
subjects in white or other light colours may be recorded
whitish, blurred and with weak contrast.
Cancelling the 0 Lux Night View Function
Set the [0 LUX OFF/ON] Switch to [OFF] to make the [OLUX]
Indication disappear.
- 96 -