Panasonic NV-DS15EN - Page 90

® Date and Time
The time is indicated in the 24-hour system.
Making the Date/Time Indication Appear
This Movie Camera automatically records the date and time,
however not directly In the picture but as part of the sub code
( ■ 4 162).
To make the Date/T»me Indication appear, set [DATE/TIME]
on the [DISPLAY SETUP] Sub-Menu to the desired setting.
It is also possible to make the Date/Time Indication appear
and change It by repeatedly pressing the [DATE/TIME] Button
on the Remote Controller. 122)
Changing the Counter Display Mode
By changing the setting for [C.DISPLAY] on the [DISPLAY
SETUP] Sub-Menu, the Counter Display Mode can be
changed in the order shown in the above illustrations
<3) COUNTER; Tape Counter Indication
® MEMORY! Tape Counter Indication with activated
Memory Stop Indication
(^TIMECODE: Time Code Indication
Changing the Display Mode
By changing the setting for [DISPLAY] on the [DISPLAY
SETUP] Sub-Menu, the Counter Display Mode can be
changed in the order shown in the above Illustrations
@ALL: All Indications appear (initial setting)
(§) PARTIAL: Only a few Indications sqopear
(§) OFF: The minimally required indications, such as
the Operation Mode Indications and Warning/
Alarm Indications, appear
- 180 -