Panasonic NV-HD90 - The NICAM Broadcast System; Editing; Assembly Editing

Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
Anew scene can be added to the en¢ of a previous one.
Preparation
Connect a movie camera or another VTR to this VTR as
shown.
elnsert a recorded cassette tape with an intact erasure
prevention tab.
Select the video source required by pressing INPUT
SELECT to set At
The NICAM Broadcast System
Editing
Recording VTR
TONS ;
ced Cperat
* "playback anit”;
Operations
Advan
1 Search for the end of the previous
recording.
PLAY
>
2 Press PAUSE/STILL.
PAJSESTIL
®
3 Set for the new recording by pressing
REC.
6 rec zg
4 Start the new recording by pressing
PAUSE/STILL again.
PauSESTILL
Notes:
The new sound will be recorded on beth the normat anc
Hi-Fi sound tracks.
®Normat sound track is only for recording mono sound.
37