Panasonic NV-HD90 - Setting the Clock of the VTR

34
Setting the Clock of the VTR
In addition to setting the VTR ciock from the remote
controller, it can also be set directly from the VTR. 2 1 - 3
Preparation For Exampte:
Turn on the VTR. Date: 16th, October, 1999
:
Time:
20:15
Operations Display Symbols
1 cuac SET Keep CLOCK SET pressed for more than
1e) 2 seconds.
2 Set each item by pressing + or — and NEXT.
Set Year “99”.
Set Month “10”.
Set Date "16".
Set Hour “20”.
Set Minute “15”.
@There is no need to press NEXT.
oo = SES ESS
3 Lack SET Press CLOCK SET.
[e) ©The clock will start
Time Reset Function Note: : .
tf the clock is less than two minutes slow or fast. itean The clock operates for up to 60 minutes by its backup
easily be reset to the proper time. system in the event of power failure
For example: Resetting the clock to 12:00.00. fine!
+ Press CLOCK SET at any lime between 11:58.00 and
12:01.59
for
more
than
2
seconds.
e
=
2 Press CLOCK SET again as soon as you hear the aes
12:00.00 time signal.