Panasonic PT-AE4000E

Menu Navigation
E
NGLISH - 17
Menu list
The menu options are structured and categorised. You can navigate through the menu with ▲ ▼ ◄ ► buttons.
NOTE:
The underlined items are factory default settings. •
Some default settings vary by the selected input signal. •
Sub-menu items vary according to the selected input signal. •
Some settings are adjustable without any signals. •
PICTURE
It is possible to adjust the picture quality.
PICTURE MODE page 20
NORMAL DYNAMIC
COLOUR1 COLOUR2
CINEMA1 CINEMA2
CINEMA3
CONTRAST page 20
(Default: 0)
BRIGHTNESS page 20
(Default: 0)
COLOUR page 20
(Default: 0)
TINT page 20
(Default: 0)
SHARPNESS page 20
(Default: 0)
COLOUR TEMPERATURE page 21
(Default: 0)
DYNAMIC IRIS page 21
ON OFF
WAVEFORM MONITOR page 21
OFF
FULL SCAN(Y) FULL SCAN(R)
FULL SCAN(G) FULL SCAN(B)
SINGLE LINE SCAN(Y)
SINGLE LINE SCAN(R)
SINGLE LINE SCAN(G)
SINGLE LINE SCAN(B)
MONITOR POSITION
UPPER LEFT UPPER CENTRE
UPPER RIGHT LOWER LEFT
LOWER CENTRE LOWER RIGHT
AUTO ADJUST
START AUTO ADJUST
BLACK LEVEL ADJUST
WHITE LEVEL ADJUST
RGB ADJUST (BLACK)
RGB ADJUST (WHITE)
SPLIT ADJUST page 22
AREA SELECT
SPLIT ADJUST MODE
NORMAL REVERSE
▼
▲
ADVANCED MENU page 23
GAMMA ADJUSTMENT
SIMPLE ADVANCED
CONTRAST R (Default: 0)
CONTRAST G (Default: 0)
CONTRAST B (Default: 0)
BRIGHTNESS R (Default: 0)
BRIGHTNESS G (Default: 0)
BRIGHTNESS B (Default: 0)
NR
(Default: 0)
MPEG NR
(Default: 0)
FRAME CREATION
OFF MODE1
MODE2 MODE3
COLOUR MANAGEMENT
PROFILE ADJUSTMENT MODE
START ADJUSTMENT LOG
PROFILE SAVE PROFILE DELETE
PROFILE NAME CHANGE
x.v.Colour
ON OFF
DETAIL CLARITY (Default: 3)
CINEMA REALITY
ON OFF
TV-SYSTEM
AUTO
NTSC NTSC 4.43
PAL PAL-M
PAL-N SECAM
RGB/YPbPr
AUTO RGB YPbPr
MEMORY SAVE page 30
MEMORY 1 - 16
MEMORY LOAD page 31
MEMORY 1 - 16
MEMORY EDIT page 31
MEMORY DELETE
MEMORY 1 - 16 ALL DELETE
MEMORY NAME CHANGE
MEMORY 1 - 16
SIGNAL MODE page 31