Panasonic PT-AE4000E - Colour Management

PICTURE menu
E
NGLISH - 27
J
COLOUR MANAGEMENT
You can adjust a selected colour individually
by using CURSOR or adjust the six colour
components (Red, Green, Blue, Cyan, Magenta,
Yellow) by using RGBCMY.
To open the COLOUR MANAGEMENT menu,
select from the ADVANCED MENU in the
PICTURE menu, or press the FUNCTION button
as a shortcut.
In the factory default setting, COLOUR
MANAGEMENT is set as a default for the
FUNCTION
button.
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
NORMAL
CURSOR
COLOUR MANAGEMENT
RETURN
SELECT
Create a new prole
Q
Adjusting the selected colour with the
CURSOR mode.
Select a colour and adjust COLOUR, TINT and
BRIGHTNESS.
Press ◄ ►1. to select CURSOR in ADJUSTMENT
MODE.
Press ▲ ▼ to select 2. START ADJUSTMENT and
press the ENTER button.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed.
Target cursor
Move the cursor with ▲ ▼ ◄ ► to the required 3.
place to select a colour and press the ENTER
button.
The colour at the centre of the target cursor is sampled
and the sample box is displayed in the left of the cursor.
The menu items are displayed on the screen.
You may fail to adjust when the very edge point of
the projection area is selected as sample.
You can create a prole only when ADJUSTMENT
MODE is set to either CURSOR or RGBCMY.
ENTER
DEFAULT
RETURN
SELECT
CURSOR
-
+
-
+
-
+
COLOUR
TINT
BRIGHTNESS
0
0
0
Sampled colour
Press ▲ ▼ to select a menu item and the ◄ ► to 4.
adjust each item level.
The result box is displayed on the right of the cursor
and shows the adjusted colour.
ENTER
DEFAULT
RETURN
SELECT
CURSOR
-
+
-
+
-
+
COLOUR
TINT
BRIGHTNESS
+10
+10
+10
Adjusted colour
COLOUR
Adjust the vividness of the colour.
Setting range: −30 to +30
TINT
Adjust the colour tone.
Setting range: −30 to +30
BRIGHTNESS
Adjust the brightness of the colour.
Setting range: −20 to +20
Press the 5. ENTER button to store the adjusted
result.
“ PROCESSING” is displayed for a few seconds and
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
Press the 6. MENU or RETURN button to return to
the previous menu.
Repeat the steps above to store more adjustment.
When the LOG is fully stored, the screen will
be switched automatically to the COLOUR
MANAGEMENT menu.
Adjusting the selected colour with the
RGBCMY mode.
Select the colour from 6 different colour types
(RED, GREEN, BLUE, CYAN, MAGENTA,
YELLOW) and adjust COLOUR,TINT and
BRIGHTNESS.
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
NORMAL
RGBCMY
Press ◄ ► to select 1. RGBCMY in ADJUSTMENT
MODE.
Press ▲ ▼2. to select START ADJUSTMENT and
press the ENTER button.