Panasonic PT-AE900U

2. Input a window pattern signal to PC IN (RGB) connector.
Note:
· Use approx. 15 % window pattern as follows.
Black background (screen width) : White window
width = 2 : 1
Black background (screen height) : White window
height = 3 : 1
3. Click the OK button.
7.9. 6130 Revision
When you replaced the sampling hold IC (IC1053, IC1055,
IC1057), set "6130 Revision" corresponding to replaced IC into
OFF.
7.9.1. Adjustment Menu
7.9.2. Equipment to be used
PC, Software for Adjustment
7.9.3. Adjustment Procedure
1. Display the adjustment menu.
2. Click [*-OFF] button corresponding to replaced IC.
· Replacement of IC1053: B-OFF
· Replacement of IC1055: G-OFF
· Replacement of IC1057: R-OFF
Note:
· When the button is clicked, individual adjustment
values of IC is reset into the initial value when
shipped.
29
PT-AE900U / PT-AE900E