Panasonic PT-AX200U

3. Unscrew the 2 screws and remove the K-P.C.Board block.
6.6. Removal of B/Q-Module
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the lamp unit terminal.
3. Unscrew the 2 screws and release the 2 grounding
terminals.
4. Unscrew the 3 screws and remove the power block (B/Q-
Module and P-Module).
5. Unscrew the 1 screw and separate the B/Q-Module block
and P-Module block.
6. Unscrew the 2 screws.
7. While pressing to shut each hook of the 2 resinous stands,
remove the B/Q-Module.
6.7. Removal of P-Module
1. Remove the P-Module according to the steps 1 through 5 in
the section 6.6. "Removal of B/Q Module".
2. Unscrew the 2 screws.
3. While pressing to shut each hook of the 2 resinous stands,
remove the P-Module.
6.8. Removal of Lamp Unit
1. Turn the projector upside down.
2. Loosen the 2 screws until they idle and remove the lamp
unit cover.
16
PT-AX200U / PT-AX200E