Panasonic PT-FX400U

SECURITY menu
ENGLISH -
65
Settings
DISPLAY SETTING
You can display the security message (text and
image) on the projected image.
Press ▲▼ to select [DISPLAY 1 )
SETTING].
Press ◄► to switch [DISPLAY 2 )
SETTING].
The setting will change as follows each time the
z
button is pressed.
OFF TEXT USER LOGO
OFF
The [TEXT] / [USER LOGO] display
is disabled.
TEXT The text display is enabled.
USER LOGO
The logo transferred by “Logo
Transfer Software *
1
” is projected
“Logo Transfer Software” is included on the *1 :
supplied CD-ROM.
Note
To create the image for [USER LOGO], “Logo Transfer
z
Software” included in the supplied CD-ROM is required.
You cannot display both security message and closed
z
caption at the same time.
TEXT CHANGE
You can enter your original text to be displayed when
[DISPLAY SETTING] is turned [TEXT].
Press ▲▼ to select [TEXT CHANGE].1 )
Press the <ENTER> button.2 )
The [TEXT CHANGE] screen will be displayed.
z
Press ▲▼◄► to select characters 3 )
and press <ENTER> button to input
them.
Up to 22 characters can be input.
z
Press ▲▼◄► to select [OK], and 4 )
Press the <ENTER> button.
The text is now changed.
z
MENU LOCK
Display the Menu and enable Menu operation by
pressing <MENU> button.
Press ▲▼ to select [MENU LOCK].1 )
Press ◄► to switch [MENU LOCK].2 )
The setting will change as follows each time the
z
button is pressed.
OFF ON
OFF
Deactivates the [MENU LOCK]
system.
ON Activates the [MENU LOCK] system.
Note
Once [MENU LOCK] is set to [ON], you cannot use
z
<MENU> button unless you input the correct password.
The [MENU LOCK] is set to [OFF] by default and when
z
INITIALIZE ALL is executed.
The unlock state is maintained until the projector is set to
z
the standby mode.
MENU LOCK PASSWORD
You can change the password for [MENU LOCK]
system.
Press ▲▼ to select [MENU LOCK 1 )
PASSWORD].
Press the <ENTER> button.2 )
The [MENU LOCK PASSWORD] screen will be
z
displayed.
Press ▲▼◄► to select characters 3 )
and press the <ENTER> button to input
them.
Up to 16 characters can be input.
z
Press ▲▼◄► to select [OK], and 4 )
Press the <ENTER> button.
To stop, select [CANCEL].
z
Attention
The password is “AAAA” by default or when INITIALIZE
z
ALL is executed.
Change the MENU LOCK PASSWORD regularly and
z
make it uneasy to guess.