Panasonic PT-FX400U

POSITION menu
44
- ENGLISH
Settings
ASPECT
You can switch the horizontal and vertical ratio (aspect
ratio).
Press ▲▼ to select [ASPECT].1 )
Press ◄► or the <ENTER> button.2 )
The [ASPECT] screen appears.
z
Press ◄► to change the setting.3 )
PT-FW430U
The aspect ratio switches based on the input signals
and the screen format setting (16:10 or 16:9).
(
Æ
page 51)
[When S-Video/Video/YP
B
P
R
is input]
[When 16:10
is selected]
[When 16:9
is selected]
NORMAL
NORMAL
H-FIT
H-FIT
AUTO
AUTO
AUTO
REAL
FULL
FULL
WIDE
Note
Only NTSC 525i (480i) signals are projected in AUTO
z
mode.
Only specic input signals are projected in REAL mode.
z
When 16:9 signals are detected,
z
[When 16:10 is selected]: The aspect ratio switches from
NORMAL

V-FIT

FULL

4:3.
[When 16:9 is selected]: The aspect ratio does not
switch.
[When COMPUTER is input]
[When 16:10
is selected]
[When 16:9
is selected]
NORMAL
NORMAL
REAL
REAL
FULL H-FIT
H-FIT
FULL
WIDE
Note
Only specic input signals are projected in REAL
z
mode.
When WXGA768 signals are detected,
z
[When 16:10 is selected]: The aspect ratio switches
from WIDE

V-FIT

FULL

NORMAL.
[When 16:9 is selected]: The aspect ratio switches
from NORMAL

FULL.
When wide signals *
z
2
other than WXGA768,
WIDE720, 1125 (1080)/50p, and 1125 (1080)/60p
are detected,
[When 16:10 is selected]: The aspect ratio switches
from WIDE

NORMAL.
[When 16:9 is selected]: The aspect ratio switches
from NORMAL

FULL.
AUTO
J
[Only when NTSC and 525i (480i) signals are
input]
If signals contain a signal identifying the aspect
ratio, the proper ratio is automatically set and the
image is projected.
NORMAL
J
When standard *
1
or 16:9 signals are input, the
image is projected in the input aspect ratio.
When 15:9 or 16:10 signals are input, the image is
shrunk to t the 4:3 screen while keeping the input
aspect ratio.
Input signal: XGA
z
Image: Panel:
Input signal: 1125 (1080)/60i
z
Image: Panel:
Input signal: WXGA800
z
Image: Panel: Screen:
Standard signals are signals with 4:3 or 5:4 aspect ratio.*1 :
Wide signals are signals with 16:10, 16:9, or 15:9 aspect ratio.*2 :