Panasonic PT-FX400U

POSITION menu
ENGLISH -
45
Settings
WIDE
J
When standard *
1
signals are input, the image is
projected in the 16:9 aspect ratio.
When 15:9, 16:9 or 16:10 signals are input, the
image is projected in the input aspect ratio.
Input signal: XGA
z
Image: Panel:
Input signal: WXGA768
z
Image: Panel:
H-FIT
J
When standard signals *
1
are input, the aspect
ratio is kept xed. The image is projected using
all the panel pixels horizontally, and the vertical
edges of the image are cropped.
Input signal: XGA
z
Image:
V-FIT
J
When 16:9 signals are input, the aspect ratio is
kept xed. The image is projected using all the
panel pixels vertically, and the horizontal edges of
the image are cropped.
Input signal: 1125 (1080)/60i
z
Image:
FULL
J
The image is projected using all the panel (screen)
pixels. The input signals are converted to the
aspect ratio of the panel (screen).
Input signal: XGA
z
Image:
Input signal: 1125 (1080)/60i
z
Image:
REAL
J
The image is projected without size adjustment,
keeping the resolution of the input signals.
Input signal: XGA
z
Image: Panel:
Attention
When an image of 4:3 aspect ratio is projected in the
z
16:9 ratio, the edges of the image may become invisible
or distorted. It is recommended to select the 4:3 aspect
ratio to respect the intention of the image creator.
Note
If you select an aspect ratio different from the input
z
signals, the image displayed will be different from the
original image.
When used for commercial use or public viewing (in
z
a coffee shop, hotel, etc.,), stretching or shrinking a
copyright-protected image using the aspect ratio function
of this projector may infringe on the copyrights.
When S Video, Video, or YP
z
B
P
R
signals are input, AUTO
may not appear due to the properties of the signals.
Standard signals are signals with 4:3 or 5:4 aspect ratio.*1 :