INF
- 30
G
G Check the IC4001 and its associated circuits.
Replace G-PCB.
A
【 Digital 】
Check the cable connected to HDMI and DIGITAL
LINK.
Connect it properly or replace cable.
A
【 Digital 】
Speech waveform of A28 connector 16 pin (R)
and 17 pin (L), can be detected.
A Check the IC1013 and its associated circuits.
■ Audio function does not work
G
【 Analog 】
Check the cable connected to AUDIO.
Connect it properly or replace cable.
G
Adjustment of volume will change in waveform.
IC4002 13 pin (R), 2 pin (L)
G Check the IC4002 and its associated circuits.
A
【 Digital 】
Cable check of A28-G1 connector.
Replace cable.
G
【 Analog / Digital 】
Waveform of IC4001 13 pin (R) and 3 pin (L) can
be detected.
If an input signal is changed, a waveform will change.
NG
OK
NG
OK
OK
NG
OK
NG
NG
OK
OK
NG
To Next Page
Loading...
