Panasonic PT-RZ470 Series

ADJ - 10
1. 6. 4. Adjustment
1. 1) Put a check mark into all Adjustment items, and click
the [ Adjustment Start ] button.
2) Click the [yes] button of an adjustment start
confirmation message.
2. Aging is started for "current adjustment" and "White Balanse adjustment". (About 15 minutes)
When the progress bar reaches the right end, aging is complete. ("Finished" message is displayed)
3. Click the [OK] button or after 3 seconds progress, will start Current adjustment.
When the progress bar reaches the right end, Current adjustment is complete. ("Finished" message is displayed)
4. Click the [OK] button or after 3 seconds progress, will start White Balance adjustment.
When the progress bar reaches the right end, White Balance adjustment is complete. ("Finished" message is displayed)
5. Aging is started for "Color Luminance adjustment".
When the progress bar reaches the right end, aging is complete. ("Finished" message is displayed)
6. Click the [OK] button or after 3 seconds progress, will start Color Luminance adjustment.
When the progress bar reaches the right end, Color Luminance adjustment is complete.
("Finished" message is displayed)