Panasonic PT-RZ470 Series

2. 5. Removal of D-P.C.Board
1. Remove optical block in accordance with the procedure till 2.4 6.
2. 1) Remove 2 screws (ordinal + type black tap screw) then remove duct top G1.
2) Remove 2 screws (ordinal + type silver screw with washers) then remove LD-G fan.
3. Remove 1 screw (ordinal + type silver screw with washers) then remove Drive fan.
4. Remove 4 screws (ordinal + type black tap screws) then remove the duct bottom G.
Duct top G1
LD-G fan
Drive fan
Duct bottom G
XTBT969FJK
XYN3+F6FJ
XYN3+F6FJ
XTBT969FJK
DIS-9