2. 6. Removal of B-P.C.Board
1. Remove optical block in accordance with the procedure till 2.4 6.
2. Remove 4 screws (ordinal + type silver screws with washers) then remove the B-PCB block.
3. Remove 4 screws (ordinal + type silver screws with washers) then remove B-PCB.
2. 7. Removal of P-P.C.Board
1. Remove B-PCB in accordance with the procedure till 2.6 2.
2. Remove 7 screws (ordinal + type silver screws with washers) then remove P-PCB block.
XYN3+F6FJ
B-PCB block
XYN3+F6FJ
B-PCB
XYN3+F6FJ
XYN3+F6FJ
P-PCB block
DIS-11
To Next Page
Loading...
