To Next PageTo Next PageWhy does the color appear pale on my Panasonic PT-RZ570B Projector?
If the color on your Panasonic Projector appears pale or grayish, check if the [COLOR] and [TINT] settings are adjusted correctly. Ensure that the external device connected to the projector is also adjusted correctly. Finally, inspect the computer cable for any damage.
Why is there no audio output from my Panasonic PT-RZ570B Projector?
If there is no audio output from your Panasonic Projector, check if the external device is correctly connected to the audio input terminal. Also, make sure the mute function is not enabled and that the [AUDIO IN SELECT] in [AUDIO SETTING] is set correctly.
How to troubleshoot a Panasonic Projector that does not turn on?
If the Panasonic Projector's power isn't turning on, make sure the power plug is firmly inserted into the outlet. Check if the switch is set to . Verify that the wall outlet is supplying electricity and that the circuit breakers haven't tripped. Also, check if the light source indicator is blinking or if the temperature indicator is lit or blinking.
What to do if image output from DVI-D of the computer does not appear on Panasonic Projector?
If the image output from DVI-D of the computer does not appear on your Panasonic Projector, check if [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. Updating the graphic accelerator driver of the computer to the latest version or performing the [EDID SELECT] setting in [DVI-D IN] and then rebooting the computer may improve the situation.
Why does image not display correctly on Panasonic Projector?
If the image does not display correctly on your Panasonic Projector, check if the [SYSTEM SELECTOR] is set properly. Verify that the [COMPUTER IN/OUT] setting is correct. Ensure there isn't a problem with the video tape or the image sources. Confirm that the input signal is compatible with the projector.
What to do if image from a computer does not appear on Panasonic PT-RZ570B?
If the image from a computer does not appear on your Panasonic Projector, verify that the cable isn't too long (if using D-Sub cables, ensure it's 10 m (32'10") or shorter). Also, confirm that the external video output on the laptop is set correctly, referring to your computer's user manual for specific key combinations like “Fn” + “F3” or “Fn” + “F10”.
Why does the remote control not respond to my Panasonic Projector?
If the remote control for your Panasonic Projector isn't responding, first, check if the batteries are depleted and ensure their polarity is correct. Make sure there are no obstructions between the remote and the projector's signal receiver. Verify the remote is within its effective range and that no other lights are affecting projection. Also, check if the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE] and confirm the ID number setting is correct.
What to do if video from HDMI compatible device does not appear on Panasonic Projector?
If the video from your HDMI compatible device does not appear or appears jumbled on your Panasonic Projector, first, check if the HDMI cable is securely connected. If it is, try turning the power of both the projector and the external device off and on. Finally, ensure that the input signal is compatible with the projector.
What to do if my Panasonic PT-RZ570B has no image?
If you're not getting any image on your Panasonic Projector, first ensure that all connections to external devices are correctly connected. Then, check if the input selection setting is correct and that the [BRIGHTNESS] adjustment isn't at its minimum. Verify that the external device connected to the projector is working properly and that the shutter function isn't active. If the power indicator is blinking red, it is recommended to consult your dealer.
Why doesn't the image from my computer appear on the Panasonic Projector?
If the image from your computer doesn't appear on the Panasonic Projector, check if the cable is too long. Also, ensure that the external video output on the laptop is set correctly.
General| Brightness | 5, 000 lumens |
|---|---|
| Resolution | 1920 x 1200 (WUXGA) |
| Contrast Ratio | 20, 000:1 |
| Light Source | Laser |
| Light Source Life | 20, 000 hours |
| Display Technology | DLP |
| Keystone Correction | Vertical: ±30°, Horizontal: ±30° |
| Input Terminals | HDMI |
| Output Terminals | D-Sub 15-pin x 1 |
| Control Terminals | RS-232C, LAN |
| Dimensions (W x H x D) | 420 x 128 x 360 mm |
