W
wgoodwinAug 27, 2025
Why is my Panasonic PT-RZ570B Projector remote control not working?
- EEric HerreraAug 27, 2025
If the remote control for your Panasonic Projector isn't responding, start by checking if the batteries are depleted or if the polarity is set incorrectly. Ensure there are no obstructions between the remote and the projector's signal receiver, and that you're within the remote's effective range. Also, check if other light sources are interfering with the projection and confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] isn't set to [DISABLE]. Finally, verify that the ID number setting operation is correct.












