Panasonic PT-TW330EA - ON(G);STANDBY(R) Indicator

Powering ON/OFF
28
- ENGLISH
Basic Operation
ON(G)/STANDBY(R) indicator
The ON(G)/STANDBY(R) indicator informs you the status of the power. Conrm the status of the
<ON(G)/STANDBY(R)> indicator before operating the projector.
Indicator status Status
No illumination The power plug is not connected to the outlet.
Red
Lit
*
1
The power is switched off. (Standby mode)
Press
<
v
/
b
>
to start projection.
Slow
Blinking
*
2
The power is switched off. (Standby mode)
Press
<
v
/
b
>
to start projection.
Blinking
The projector is preparing to switch off the power.
The power is switched off after a while. (Changes to the standby mode.)
Green
Lit The projector is in the projection status.
Blinking The projector is preparing for projection.

1: When [LAN (Standby)], [VGA Out (Standby)], [In Standby Mode (Audio)] are all set to [Off].

2: When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] is/are set to [On].
Note
When the <ON(G)/STANDBY(R)> indicator is blinking in red, the internal fans start to operate and the projector starts
z
cooling.
<ON(G)/STANDBY(R)> indicator