Panasonic PT-TW330EA - Connect to Network

LAN
ENGLISH -
47
Settings
The projector has a network function, and the following operations are available from the computer using the web
browser control.
Setting and adjustment of the projector.
z
Display of the projector status.
z
Transmission of an E-mail message when there is a problem with the projector.
z
This projector supports "Crestron RoomView" and the following application software from Crestron company.
(
Æ
page 51)
RoomView Express
z
Attention
Connects LAN to indoor equipment.
z
Set the [UART Mode] in the [Setting] menu to [LAN] before controlling the projector via <LAN> terminal.
z
Note
A LAN cable is required to use the wired LAN function.
z
Computer
Projector
LAN cable (straight)
LAN cable (straight)
Hub
Connect to Network
A Web browser is required to use this function. Conrm that the Web browser can be used beforehand.
z
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Communication with an E-mail server is required to use the E-mail function. Conrm that the E-mail can be
z
used beforehand.
Use shielded LAN cable (STP cable) that is compatible with category 5 or above.
z
Use a LAN cable with length of 100 m or shorter.
z
Name and function of network function parts
J
(1) ACT lamp (yellow)
Blinks when the LAN network function acts
normal.
(2) LAN terminal (10BASE-T/100BASE-TX)
Used to connect the LAN cable here.
(3) LINK lamp (green)
Lights on when connected to network.
(1)
(2)
(3)