Appendix
ENGLISH -
63
Appendix
Control commands
J
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS INPUT selection
(Parameter)
VID = Video
RG1 = Computer 1
RG2 = Computer 2
HD1 = HDMI
OSH AV mute function
Turn off the projection and sound temporarily.
Do not send the command consecutively.
(Parameters)
0 = AV MUTE mode off
1 = AV MUTE mode on
AMT Volume mute function
0 = OFF
1 = ON
QPW Power query
000 = Standby
001 = Power on
Q$S Lamp condition query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active
To Next Page
Loading...
