Panasonic PT-TW340 - Page 23

ENGLISH - 23
r Only for PT-TX210
1
2 3
4
5 6
7
9
8
1 <VARIABLE AUDIO OUT> terminal
This is the terminal to output audio signal input to the
projector.
2 <VIDEO IN> terminal
This is the terminal to input video signals.
3 <COMPUTER 1 IN> terminal
This is the terminal to input RGB, YP
B
P
R
/YC
B
C
R
or
S-video signals.
4 <MONITOR OUT> terminal
This is the terminal to output the RGB
signals to external
monitor.
5 <HDMI IN> terminal
This is the terminal to input HDMI signals.
6 <USB B> terminal
For service use.
7 <AUDIO IN 1> terminal
This is the terminal to input computer audio signals.
In addition, if you have set [HDMI setup] → [Sound] to
[Computer], it outputs the analog audio of the input signal
which is input to <AUDIO IN 1> terminal when the HDMI
input source is selected.
8 <AUDIO IN 2 (L/R)> terminal
This is the terminal to input Video, S-video and YC
B
C
R
/
YP
B
P
R
audio signals.
There are a left (L) terminal and a right (R) terminal.
9 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
Chapter 1 Preparation - About your projector