Panasonic PT-VW340 Series

3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Note
f The panel resolution is less than the picture, it will be enlarged when maintaining the aspect ratio.
f The panel resolution is more than the picture, it will be reduced when maintaining the aspect ratio.
Playing the video
When [AUTOPLAY] is set to [OFF]
It will play a video le every time.
1) Press asqw to select a file.
2) Press the <ENTER> button.
f Playing on the full screen.
f Press the <ENTER> button to pause the video playing. Press the button again to play the video at the position of pause.
f Press qw to forward or backward during playing the video. You can select the speed of three stage according to the
numbers which you pressed qw.
f During playing the video, press a to play the video from the beginning. (Play from the beginning)
f During pausing the video play, press q to select the previous video le, press w to select the next video le.
3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Note
f When [AUTOPLAY] is set to [OFF], the resume play (pausing the video to play anther video/picture, or to return from
the thumbnail/folder list) will be enabled. The position of resume play will be reset when switch the [Miracast(TM)] and
[Panasonic APPLICATION] input, the AC power cord is cut off or the USB memory is removed.
When [AUTOPLAY] is set to [ON]
All video les in the same folder will play automatically.
1) Press asqw to select a file.
2) Press the <ENTER> button.
f Playing on the full screen.
f Press the <ENTER> button to pause the video playing. Press the button again to play the video at the position of pause.
f Press qw to forward or backward during playing the video. You can select the speed of three stage according to the
numbers which you pressed qw.
f During playing the video, press a to play the video from the beginning. (Play from the beginning)
f During pausing the video play, press q to select the previous video le, press w to select the next video le.
3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Termination of the memory viewer
1) When terminate the memory viewer, remove the USB memory directly.
Playing on the full screen (Video)
Forward/Backward/
Pause
Timer bar
Guide display
112 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu