Connecting example : AV equipment
For <HDMI IN>/<VIDEO IN>/<S-VIDEO IN> terminals
Attention
f Always use one of the following when connecting a VCR.
- A VCR with built-in time base corrector (TBC).
- A time base corrector (TBC) between the projector and the VCR.
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector
(TBC) between the projector and the external devices.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to
HDMI standards is used, images may be interrupted or may not be displayed.
f This projector does not support the Viera link (HDMI).
f For the specications of the RGB signals that can be applied from the PC, refer to “List of compatible signals”.
(Æ pages 130 - 131)
Connecting example : Computers
Blu-ray disk player
with HDMI terminal
Video deck (TBC built-in)
DVD player
Control computer
Computer
Control computer
Computer
Computer
Computer
ENGLISH
-
37
Chapter 2 Getting Started - Connecting
To Next Page
Loading...
