EasyManua.ls Logo

Panasonic PT-VW340 Series

Panasonic PT-VW340 Series
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the <HDMI IN> terminal of the projector and the image is not
projected correctly.
1) Press as to select [HDMI SIGNAL LEVEL].
2) Press the <ENTER> button.
f The [HDMI SIGNAL LEVEL] screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
Sets the signal level automatically.
[64-940]
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN> terminal.
[0-1023]
Select when the DVI terminal output of an external device (such as a computer) is connected to
the <HDMI IN> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the
<HDMI IN> terminal.
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operation
instruction of the external device regarding the output of the external device.
f The HDMI signal level is displayed for every 30 bits of input.
[CLOSED CAPTION SETTING]
(Only for NTSC, 480i YCBCR input)
Set the closed caption.
Selecting the closed caption display
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [CLOSED CAPTION].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Closed captions are displayed.
[OFF]
Closed captions are not displayed.
f When [ON] is selected, proceed to Step 5).
5) When the confirmation is displayed, select [OK], and press the <ENTER> button.
Setting the closed caption mode
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
ENGLISH
-
69
Chapter 4 Settings - [DISPLAY OPTION] menu

Table of Contents

Related product manuals