[CONNECTION LOCK]
Switches the network signal or chooses one xed signal.
1) Press as to select [CONNECTION LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION],
[Miracast(TM)] and [MEMORY VIEWER].
[Panasonic APPLICATION]
The [Panasonic APPLICATION] is the xed [NETWORK/USB] input signal.
[Miracast(TM)]
The [Miracast(TM)] is the xed [NETWORK/USB] input signal.
[MEMORY VIEWER]
The [MEMORY VIEWER] is the xed [NETWORK/USB] input signal.
Note
f If [CONNECTION LOCK] is set to one xed item other than [OFF] and you press other buttons, the [KEY NOT APPLICABLE]
appears.
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry eld.
4) Select [OK] with the as buttons and press the <ENTER> button.
f To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
Note
f [Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Enables the enter of network password.
[OFF]
Disables the enter of network password.
Note
f Set to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.0”.
(Default: [OFF])
f When using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring &
Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].
[PASSWORD CHANGE]
1) Press as to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the <ENTER> button.
Note
f You can enter 8 characters at most.
f Change the password periodically that is hard to guess.
ENGLISH
-
89
Chapter 4 Settings - [NETWORK/USB] menu
To Next Page
Loading...
