[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
The picture becomes suitable for moving images in general.
[DYNAMIC]
The light output is maximized for use in bright areas.
[BLACKBOARD]
The picture becomes suitable for projecting on a black board.
[WHITE BOARD]
The picture becomes suitable for projecting on a white board.
[CINEMA]*
1
The picture becomes suitable for movie sources.
[NATURAL]*
2
The picture becomes suitable for use in low-light areas.
[EASY SETTING]*
3
When executing the EASY SETTING function, it will be the optimal hue for the projected image
according to the projection environment.*
4
*1 Only for the movie-based signals.
*2 Only for the still image signals.
*3 When the projector leaves the factory, [EASY SETTING] does not appear. When execute the EASY SETTING function
by setting [COLORBOARD] to [ON] in [EASY SETTING], [EASY SETTING] is added to the items.
*4 If you use the projector in different environment, the screen may change. Please execute the EASY SETTING function
again by setting [COLORBOARD] to [ON] in [EASY SETTING].
Note
f The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Adjustment range
Press the w button.
Brightens the screen and makes the color of image deeper.
-32 ~ +32
Press the q button.
Darkens the screen and makes the color of image lighter.
Attention
f Adjust [BRIGHTNESS] rst when you need to adjust [BRIGHTNESS] and [CONTRAST].
58 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu
To Next Page
Loading...
