EasyManua.ls Logo

Panasonic PT-VW540

Panasonic PT-VW540
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[GAMMA]
You can adjust contrast balance.
1) Press as to select [GAMMA].
2) Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Adjustment range
Press the w button.
The midtones become brighter.
-8 ~ +7
Press the q button.
The midtones become darker.
[IRIS]
By automatically adjusting the aperture according to the image, it makes an image of optimum contrast.
1) Press as to select [IRIS].
2) Press qw or the <ENTER> button.
f The [IRIS] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
No aperture correction.
[ON]
Corrects the aperture.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press as to select [DAYLIGHT VIEW].
2) Press qw or the <ENTER> button.
f The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Corrects the vividness of the image.
[OFF]
No correction.
[AUTO]
Detects the brightness of the installation environment with the luminance sensor, and automatically
corrects the vividness of the image.
Note
f [DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to [REAR/DESK] or
[REAR/CEILING].
f The luminance may not be detected correctly when an object is placed on top of the projector, blocking the luminance sensor. In such a
case, this function may not operate properly even if it is set to [AUTO].
[DIGITAL CINEMA REALITY]
When inputting the following signals, it performs cinema processing to improve the vertical resolution and the
image quality.
480/60i, 576/50i, 1080/60i, 1080/50i signals and VIDEO signal
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw or the <ENTER> button.
f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
56 - ENGLISH
Chapter 4 Settings - [PICTURE] menu

Table of Contents

Other manuals for Panasonic PT-VW540

Related product manuals