Panasonic S-200PE1E8A - Simple Settings Function

7
7
7-1. Simple Settings Function
• Thisallowsthefilterlifetime,operatingmode
prioritychange,centralcontroladdress,andother
settingstobemadeforanindividualorgroup-
controlindoorunittowhichtheremotecontroller
usedforsimplesettingsisconnected.
Whensimplesettingsmodeisengaged,operation
stopsattheindividualorgroup-controlindoorunit
towhichtheremotecontrollerforsimplesettingsis
connected.
<Procedure>
1
Pressandholdthe and buttons
simultaneouslyfor4secondsorlonger.
2
“ ,”unitNo.“ ”(or“ ”inthecaseof
groupcontrol),itemcode“ ,”andsettingsdata
“ ”aredisplayedblinkingontheremote
controllerLCDdisplay(Fig.7-1).Atthistime,the
indoorunitfan(orallindoorunitfansinthecaseof
groupcontrol)beginsoperating.
3
Ifgroupcontrolisineffect,pressthe 
buttonandselecttheaddress(unitNo.)ofthe
indoorunittoset.Atthistime,thefanattheindoor
unitbeginsoperating.
*IfunitNo.“
”isdisplayed,thesamesetting
willbemadeforallindoorunits.
4
Pressthetemperaturesetting / 
buttonstoselecttheitemcodetochange.
5
Pressthetimertime / buttonstoselectthe
desiredsettingdata.
*Foritemcodesandsettingdata,refertothe
followingpage.
6
Pressthe button.(Thedisplaystopsblinking
andremainslit,andsettingiscompleted.)
7
Pressthe buttontoreturntonormalremote
controllerdisplay.
Fig. 7-1
Fig. 7-1
CZ-RTC2
2
3
4
1
6
5
7
Fig. 7-1
7-2
SM830194-04_Single_BigPAC.indb 2 2014/11/14 14:38:32