7
(Continuedfrompreviouspage)
Item code Item Description
3C
Heatexchanger
temperatureforcoldair
discharge
Theheatexchangertemperaturecontrolpointforpreventionofcold
airdischargeduringheatingoperationcanbechanged.
3d
Fanoutputswitching
TheindoorunitPCBoptionaloutputforthefancanbeswitched
accordingtothepurposeofuse.
3E
Drainpumpdelayedstart
time
Thedrainpumpstartsafterthesettimedelayaftercoolingoperation
stops.
40
Humidifierdrainpump
setting
Thisspecifiesthehumidifieranddrainpumpsetting.
45
DCflapoperationmode Changesflapoperationtodraftreductionmode.
46
DCflapswingmode Selectstheswingoperationmodefortheflap.
5d
DCfantapsetting
SetstheDCfantapaccordingtothepurposeofuse.
Changethesettingsdataatthesametime.
5E
HumidifierONtime
SetsthehumidifieroutputONtimeforwhenthehumidifieris
operating.
ON/OFFcontrolisperformedduringhumidifieroperation.
ThissettingthereforesetstheONtimeper60-secondinterval.
5F
StopattimesetforOFF
timerafteroperationstarts
Thissettingenablesafunctionthatstopsoperationwhenthe
amountoftimesetfortheOFFtimerhaspassedafterremote
controlleroperationwasstarted.
60
Timerfunctionchange
prohibit
Thisfunctionprohibitschangesfrombeingmadetotheremote
controllertimesetting.
62
Smudgingcontrol Smudgingcontrolisdisabledwhen0000isset.
7-13
SM830194-04_Single_BigPAC.indb 13 2014/11/14 14:38:37