5-2-2-8
5
H01 Error Code Stored in Memory and no alarm is triggered / no TIMER LED flashing
Malfunction Decision Conditions
operating in heating operation.
Indoor high pressure is detected when indoor heat exchanger is detecting very high temperature when the unit is
Phenomena: unit is stopping and re-starting very often in heating mode
Malfunction Caused
Indoor heat exchanger thermistor
Over-bent pipe (liquid side)
Clogged air filter or heat exchanger
Troubleshooting
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 8 2020/01/29 21:17:53
To Next Page
Loading...
