77
• This allows the system address, indoor unit
address, and other settings to be made for the
individual or group-control indoor unit to which
the remote controller used for detailed settings is
connected.
When detailed settings mode is engaged,
operation stops at the individual or group-control
indoor unit where the remote controller used for
detailed settings is connected. Simple settings
items can also be set at this time.
7-3. Detailed Settings Function
Fig. 7-3
<Procedure of CZ-RTC4>
CZ-RTC4
1
Press and hold the , and buttons
simultaneously for 4 seconds or longer.
A
°
°
1
6
7
3
3
4
5
4
Press the temperature setting /
select the item code to change.
buttons to
5
Press the timer time / buttons to select the
desired setting data.
*For item codes and setting data, see the following
page.
6
Press the button. (The display stops blinking
and remains lit, and setting is completed.)
7
Press the button to return to normal remote
controller display.
2
“ ”, unit No. “ ” (or “ ” in the case
of group control), item code “ ,” and settings
data “ ” are displayed blinking on the remote
controller LCD display (Fig. 7-3). At this time, the
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
3
If group control is in effect, press the
select the address (unit No.) of the indoor unit to set.
button and
At this time, the fan at the indoor unit begins operating.
2
7-4
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 4 20/01/28 11:22:16
To Next Page
Loading...
