77
<Procedure of CZ-RTC5B>
Fig. 7-4
1
Keep pressing the , and
buttons
simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.
2
Press the or button to see each
menu.
If you wish to see the next screen instantly, press
the or button.
Select “8. Detailed settings” on the LCD display
and press the button.
The “Detailed settings” screen appears on the
LCD display.
Select the “Unit no.” by pressing the or
button for changes.
3
Select the “Code no.” by pressing the or
button.
Change the “Code no.” by pressing the or
button (or keeping it pressed).
4
Select the “Set data” by pressing the or
button.
Select one of the “Set data” by pressing the
or button.
Then press the button.
5
Select the “Unit no.” by pressing the or
button and press the button.
The “Exit detailed settings and restart?” (Detailed
setting-end) screen appears on the LCD display.
Select “YES” and press the button.
Maintenance func
Sel.
20:30 (THU)
Page [ ] Confirm
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Maintenance func
Sel.
20:30 (THU)
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Page [ ] Confirm
Detailed settings
Unit no. Code no. Set data
3-1 10 0001
20:30 (THU)
Sel. Next
Detailed settings
Unit no.
Code no. Set data
10 0001
20:30 (THU)
Sel. Next
3-1
3-1
Detailed settings
Unit no.
Code no. Set data
Sel.
20:30 (THU)
10 0001
[ ] Confirm
Detailed settings
Unit no. Set dataCode no.
ALL
20:30 (THU)
Sel. Next
000201
and restart?
NOYES
xit detailed settingsE
CZ-RTC5B
20:30 (THU)
[ ]
START
7-5
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 5 20/01/28 11:22:17
To Next Page
Loading...
