88
You can restore the changed temperature to the originally set temperature automatically after a specified
time elapses.
• Set the time and temperature for each operation mode.
1. Press and at the
same time for 4 seconds or longer.
• “ ” starts blinking and the setting screen is displayed.
2. Press to select the operation mode, then press .
• Every time you press to switch between “Dry / Cool
→ Heat → Auto ”, the buzzer sounds from the
corresponding receiver.
• When not set: 1 short beep
• When already set: 2 short beeps
3. Press / to set the time to return to the set
temperature.
• Setting range: 10 to 240 min (by the 10 min)
4. Press / to set the
temperature, then press .
MAX (°C) MIN (°C)
Auto
27 17
Heat
30 16
Dry
/ Cool
30 18
8-2-1-17. Temperature Automatic Return
• The temperature range that can be set varies depending on the model.
5. Press .
• You can return to Step 2 to continue setting if you press instead of .
2, 4
5
2
1, 4
1, 3
Temperature
Time
(min)
Operation mode
Changing the setting
Perform Step 1 to 5 noted above as you did when setting.
Cancelling the setting
1. Press
and at the same time for 4 seconds or longer.
2. Press
to select the operation mode, then press for 4 seconds or longer.
• The receiver emits 1 short beep.
• Press for 10 seconds or longer to cancel settings for all operation modes.
Note
• Press to stop operation in the middle.
8-2-1-12
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 12 20/01/14 10:04:20
To Next Page
Loading...
