77
1
Keep pressing the , and
buttons
simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.
2
Press the or button to see each
menu.
If you wish to see the next screen instantly, press
the or button.
Select “7. Simple settings” on the LCD display and
press the button.
The “Simple settings” screen appears on the LCD
display.
Select the “Unit no.” by pressing the or
button for changes.
3
Select the “Code no.” by pressing the or
button.
Change the “Code no.” by pressing the or
button.
4
Select the “Set data” by pressing the or
button.
Select one of the “Set data” by pressing the
or button.
Then press the button.
5
Select the “Unit no.” by pressing the or
button and press the button.
The “Exit simple settings and restart?” (Simple
setting-end) screen appears on the LCD display.
Select “YES” and press the button.
<Procedure of CZ-RTC5B>
Fig. 7-2
Maintenance func
Sel.
20:30 (THU)
Page [ ] Confirm
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Maintenance func
Sel.
20:30 (THU)
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Page [ ] Confirm
Simple settings
Unit no. Code no. Set data
3-1 01 0001
20:30 (THU)
Sel. Next
Simple settings
Unit no.
Code no. Set data
01 0001
20:30 (THU)
Sel. Next
3-1
3-1
Simple settings
Unit no.
Code no. Set data
Sel.
20:30 (THU)
01 0001
[ ] Confirm
Simple settings
Unit no. Set dataCode no.
ALL
20:30 (THU)
Sel. Next
000201
and restart?
NOYES
xit simple settingsE
CZ-RTC5B
20:30 (THU)
[ ]
START
7-2
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 2 20/01/28 11:22:15
To Next Page
Loading...
