Panasonic SA-PM28E - PCB Checking Procedures; Cassette Mechanism Replacement; CD Mechanism Replacement; Traverse Mechanism Procedures

Procedures”, if necessary.
Contents
- Checking Procedure for each major P.C.B.
- Checking for the Main P.C.B. & Transformer P.C.B.
- Checking for the Deck P.C.B. and Deck Mechanism P.C.B.
- Checking for the Panel P.C.B.
- Checking for Headphone P.C.B. AC Led P.C.B. and Tact Switch
P.C.B.
- Checking for the CD Servo P.C.B. And CD Loading P.C.B.
- Disassembly for CD Loading Unit
- Disassembly for traverse mechanism
- Main Component Replacement Procedure
- Procedure for Replacing Cassette Holder
- Procedure for Replacing Pinch Roller and Head Block (Cassette
Mechanism Unit)
- Procedure for Replacing Motor, Capstan Belt A, Capstan Belt B
and Winding Belt (Cassette Mechanism Unit)
- Procedure for Replacing Parts on Mechanism P.C.B.
- Replacement for CD traverse deck
- Replacement for optical pickup unit (CD Mechanism)
- Replacement for a traverse gear A and a traverse gear B
- Replacement for disc tray
- Replacement for traverse deck
- Replacement of the power amplifier IC
- Handling of cassette tape jam
Warning:
This product uses a laser diode. Refer to “Precaution of Laser
Diode”.
ACHTUNG :-
- Die Lasereinheit nicht zerlegen.
- Die Lasereinheit darf nur gegen eine vom Hertsteller spezifizierte
Einheit ausgetauscht werden.
8.1. Checking Procedure for each major P.C.B
8.1.1. Checking for Main & Transformer P.C.B.
10