Panasonic SA-PM91DEE

Step 1 Remove 2 screws.
Step 2 Unsolder the terminals of Power Amp IC (IC500) and
replace the component.
12.18. Procedure for Replacing Deck
Holder
· Follow the (Step 1) - (Step 6) of Item 12.2.
· Follow the (Step 1) - (Step 4) of Item 12.3.
· Follow the (Step 1) - (Step 4) of Item 12.4.
Step 1 : Remove 1 screw and lift up damper gear.
Step 2 : Remove the cassette open spring.
Step 3 : Pull out the ribs of the cassette holder to the arrow
direction.
12.19. Replacing for CD Lid
· Follow the (Step 1) - (Step 6) of Item 12.2.
· Follow the (Step 1) - (Step 4) of Item 12.3.
· Follow the (Step 1) - (Step 4) of Item 12.5.
Step 1 : Remove 2 screws and 2 CD lid supports.
27
SA-PM91DEE