Panasonic SA-PM91DEE

Item Operational Condition
and Key Function
Details Display To Exit Mode
Laser use time While the player is
stopped and no disc is
inserted, press and
hold down the [STOP]
button on the player
and the
button on
the remote controller
unit.
Laser usage time
Measures each for DVD and CD
respectively.
[_1234_5678]
The numbers in the left show usage
time for DVD laser and those in the
right for CD laser. The four-digit
number is shown by the ten hours in
the decimal digit. The number after
0000 is 9999.
Automatically exits
the mode after five
seconds.
Reset laser use time While the usage time 1
is displayed, press and
hold down the [STOP]
button on the player
and the
button on
the remote controller
unit.
Laser usage time reset
Resets both for DVD and CD at once.
[_0000_0000] Automatically exits
the mode after five
seconds.
Spindle use time While the player is
stopped and no disc is
inserted, press and
hold down the [STOP]
button on the player
and the
button on
the remote controller
unit.
Spindle motor usage time [_00_30__ERR]
The four-digit number is shown by
the ten hours in the decimal digit.
The number after 00_00 is 99_99.
Automatically exits
the mode after five
seconds.
Reset spindle use
time
While the usage time 2
is displayed, press and
hold down the [STOP]
button on the player
and the
button on
the remote controller
unit.
Usage time 2 reset
Spindle motor usage time
[_00_00__ERR] Automatically exits
the mode after five
seconds.
Communication error
display
While the player is
stopped and no disc is
inserted, press and
hold down the [STOP]
button on the player
and the “MENU” button
on the remote
controller unit.
Displays frequency of communication
errors between system computer firm
IC and mechanical computer IC during
DVD module.
[_00_00__ERR] Automatically exits
the mode after five
seconds.
Measurement of
laser current
electricity initialization
value
While the player is
stopped and no disc is
inserted, press and
hold down the [STOP]
button on the player
and the “PAUSE”
button on the remote
controller unit.
Measurement of laser current
electricity initialization value
Memorizes each initialization value of
DVD and CD in EEPROM.
[xxx_yyy_DO]
DO : Laser current electricity
measurement mode
xxx : DVD current electricity value
yyy : CD current electricity value
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is xxx mA at DVD
laser and yyy mA at CD laser when
laser is turned on.
Automatically exits
the mode after five
seconds.
Measurement of
DVD laser current
electricity
While the player is
stopped and no disc is
inserted, press and
hold down the [STOP]
button on the player
and the “DISPLAY”
button on the remote
controller unit.
Measurement of DVD laser current
electricity
Measures DVD laser current electricity
and displays the result together with
the initialization value stored in
EEPROM. After measurement, DVD
laser is lit till the power is turned off (or
goes off when the primary power is
turned off).
[xxx_yyy_DD]
DD: DVD laser current electricity
measurement mode
xxx: Current electricity initialization
value stored in EEPROM
yyy: Present value of current
electricity
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is xxx mA and its
present value is yyy mA.
Automatically exits
the mode after five
seconds.
14.8. Tray Lock Function
14.8.1. Setting
· Disc Lock Function
1. With the SELECTOR on DVD/CD and POWER ON, hold down the [STOP] KEY on the main unit, and then press the
[POWER] KEY on the remote control for 3 seconds to enter to Lock mode A.[_ _ _LOCKED_] will be displayed for 3
seconds, and then current disc will begin playing.
2. In Lock mode A, the following key is disabled.
61
SA-PM91DEE