Panasonic SA-PM91DEE

12.25. CR16 MECHANISM ASSEMBLY
PROCEDURE
The following specified greases and/or oil must be applied
when some specific parts are changed.
1. Floil grease (VFK1298) : The floil grease must be
applied to tray, tray (L) and tray (R).
2. Hanarl oil (VFK1700) : The hanarl oil must be applied to
any parts with grease other than the said parts.
· Follow the (Step 1) - (Step 6) of Item 12.2.
· Follow the (Step 1) - (Step 4) of Item 12.3.
· Follow the (Step 1) - (Step 4) of Item 12.5.
· Follow the (Step 1) - (Step 4) of Item 12.8.
· Follow the (Step 1) - (Step 3) of Item 12.13.
· Follow the (Step 1) - (Step 4) of Item 12.16.
· Follow the (Step 1) - (Step 10) of Item 12.24.5.
· Follow the (Step 1) - (Step 4) of Item 12.24.6.
· Follow the (Step 1) - (Step 22) of Item 12.24.7.
41
SA-PM91DEE