Step 1 Remove 6 screws to remove CD Block Unit.
Step 2 Remove 2 screws.
Step 3 Remove 4 screws, remove sw lever (left) and roller
guide (R).
Step 4 Remove cd lid.
9.13. Disassembly of CD Block & CD Lid
· Follow the (Step 1) - (Step 3) of Item 9.4 - Disassembly of rear cabinet
· Follow the (Step 1) - (Step 2) of Item 9.7 - Disassembly of Main P.C.B. , Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 2) of Item 9.8 - Disassembly of CD Servo P.C.B. & Switch P.C.B.
· Follow the (Step 1) of Item 9.11 - Disassembly of Motor Unit & Motor P.C.B.
25
SC-EN37P