RQT8724
20
Basic play
Basic play
To display the picture from this unit, turn on your television and change its video input mode
(e.g. VIDEO 1, AV 1, etc.). To change your television’s video input mode, refer to its operating instructions.
[Note[
≥ Discs continue to rotate while menus are displayed. To preserve the unit’s motor and your television screen, press
[∫] (Stop) when you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
Using this unit
SURROUND
ENHANCER
VOLUME
Press to skip.
Press and hold to
– search during play
– start slow-motion play during
pause
(Motion picture part)
≥ Press [1] (Play) to start
normal play.
6 Adjust the
volume.
5 Start play.
The tray is automatically closed.
To change the sound quality
➜ page 36
3 Open the disc tray.
∫ (Stop)
2 Select “DVD/CD”.
≥ Select “TV”, “AUX”, “FM” or “AM”
to enjoy television, cable TV
programs or radio.
(Refer to pages 10 to 14 for the
necessary connections.)
1 Turn the unit on.
4 Load the disc.
≥ Load double-sided discs so the label
for the side you want to play is facing up.
≥ For DVD-RAM, remove the
disc from its cartridge
before use.
SURROUND ENHANCER
(➜ page 37)
8606En_p20-33.fm Page 20 Monday, March 13, 2006 6:27 PM
To Next Page
Loading...
