RQT8724
29
Using on-screen menus
∫ Display Menu
∫ Other Menu
Confirming HDMI information
[Note]
≥ All possible types of output are displayed.
≥ The current output for “Audio Stream”, “Video Format” and “Colour Space” will be underlined.
(If you select a video output without an “¢” mark in the “Video Output Mode” in Picture Menu, the selected video
format will not be underlined.)
≥ When “Off” is selected in “Audio Output” (➜ page 32, “HDMI” menu), “– – –” will be displayed in “Audio Stream” and
“Max Channel”.
Other Settings Items shown differ depending on the type of disc.
Information [JPEG] On ,------. Off
Subtitle Position 0 to s60 (in 2 unit steps)
Subtitle
Brightness
Auto, 0 to s7
4:3 Aspect
To select how to show images
made for 4:3 aspect screens on a
16:9 aspect television
Normal:Laterally stretches images.
Auto: Expands 4:3 letterbox
images to fill more of the
screen. Other images
appear in full in the center
of the screen.
Shrink: Images appear in the
center of the screen.
Zoom: Expands to 4:3 aspect
ratio.
If your television has a similar
feature, use it instead for a better
effect.
Just Fit Zoom
To select the appropriate screen
size to fit your television screen
[DVD-A] (Motion picture part)
[DVD-VR] [DVD-V] [VCD]
Auto, 4:3 Standard,
European Vista,
16:9 Standard, American Vista,
Cinemascope1, Cinemascope2
[MPEG4] [DivX]
Standard (a0.25 full-screen),
Original (actual recorded size),
Full (full-screen)
≥ This may not work depending on
the discs recording.
16:9 Standard (16:9)
4:3 Standard (4:3)
European Vista (1.66:1)
American Vista (1.85:1)
Cinemascope1 (2.35:1)
Cinemascope2 (2.55:1)
e.g.
Manual Zoom
To zoom in and out manually
– in 0.01-unit steps from “k1.00” to
“k1.60”
– in 0.02-unit steps from “k1.60” to
“k2.00”
– in 0.05-unit steps from “k2.00” to
“k4.00” ([MPEG4] [DivX] only)
≥ To change the steps more
quickly, press and hold [3, 4].
≥ [MPEG4] [DivX] It may not be
possible to zoom up to “k4.00”
depending upon the connected
television and its settings.
Bit Rate Display
[DVD-A] (Motion picture part)
[DVD-VR] [DVD-V] [VCD] [MPEG4]
[DivX]
On ,------. Off
GUI See-through
To make the on-screen menu
transparent
Off, On, Auto
GUI Brightness
To adjust the on-screen menu
brightness
s3 to r3
HDMI Status
Indicates various information when
connected with HDMI AV OUT terminal.
(
➜
below, Confirming HDMI information)
Setup (➜ page 30)
Play as DVD-Video
or
Play as DVD-Audio
To play DVD-Video contents of
DVD-Audio
Select “Play as DVD-Video”.
Play as DVD-VR,
Play as HighMAT
or
Play as Data Disc
To use functions for data discs
(➜ page 23)
(To play JPEG, MP3, MPEG4 or
DivX video contents on DVD-RAM,
or to play a HighMAT disc without
using HighMAT function)
Select “Play as Data Disc”.
HDMI Status----- HDMI is connected.
HDMI Information
Audio Stream
Max Channel
Video Format
Colour Space
PCM
2ch
480p/576p/720p/1080i
YCbCr (4:4:4)/YCbCr (4:2:2)/RGB
(➜ page 28, HDMI Colour Space)
Connection status
Shows the output signal type.
Shows the number of audio channels.
(➜ page 28, Video Output Mode)
HT855En.book Page 29 Saturday, March 11, 2006 7:56 PM
To Next Page
Loading...
