4. Remove the screws (×5 ) and remove the G-Board and
GS-Board.
6.13. Remove the SU-Board
1. Remove the screws (×2 ).
2. Remove the flexible cables (SUI1, SUI2, SUI3, SUI4 and
SU47) connected to the SU-Board and remove the
connectors (SC45-SU45).
3. Slide the SU-Board to the left to disconnect from
connectors (SC41-SU41 and SC42-SU42) on the SC-Board
and remove the SU-Board.
6.14. Remove the SD-Board
1. Remove the screws (×3 ).
2. Remove the flexible cables (SDI1, SDI2, SDI3, SDI4 and
SD48) connected to the SD-Board and remove the
connector (SC46-SD46).
3. Slide the SD-Board to the left to disconnect from
connectors (SC43-SD43 and SC44-SD44) on the SC-Board
and remove the SD-Board.
6.15. Remove the SC-Board
1. Unlock the cable clampers to free the cable.
2. Remove the SU-Board and SD-Board. (See section 6.13.
and 6.14.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (SC2 and SC20).
5. Remove the screws (×8
) and remove the SC-Board.
14
TH-42PZ70B / TH-42PZ70E / TH-42PY70F / TH-42PY70P
To Next Page
Loading...
