Panasonic TH-50LFE7U

To Next Page

To Previous Page

TH-50LFE7U/TH-50LFE7W/TH-50LFE7E

5.1.5. NW mode

Note :

To use the network function, set each "Network Setup" setting and make sure to set the "Control I/F Select" to "LAN".

Select the NW mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button

on the remote control.

To exit the NW mode, press the R button on the remote control.

5.1.6. ID mode

Select the ID mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on

the remote control more than 3 seconds.

To exit the ID mode, press the R button on the remote control.

Panasonic TH-50LFE7U - Page 12