EasyManua.ls Logo

Panasonic TH-50LFE7U - 4 Specifications

Panasonic TH-50LFE7U
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
TH-50LFE7U/TH-50LFE7W/TH-50LFE7E
4 Specifications
Power Source (U) 110 - 127 V AC, 50/60Hz
Power Source (W, E) 220 - 240 V AC, 50/60Hz
Power Consumption
Rated Power Consumption 95 W
Stand-by condition 0.5 W
Power off condition 0.4 W
Sound
Speakers 25 mm 90 mm 2 pcs
Audio Output 20 W [10 W + 10 W] (10 % THD)
LCD Display panel 50-inch VA panel (LED backlight), 16:9 aspect ratio
Screen size 43.1 inch (1,096 mm) (W) 24.3 inch (616 mm) (H) 49.5 inch (1,257 mm) (diagonal)
(No. of pixels) 2,073,600 (1,920 (W) 1,080 (H))
[5,760 1,080 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24psF
PC signals VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN HDMI1 TYPE A Connector 2
HDMI2
DVI-D IN DVI-D 24 Pin Compliance with DVI Revision 1.0
Content Protection Compatible with HDCP 1.1
AUDIO Stereo mini jack (M3) 1 0.5 Vrms, Shared with PC IN
PC IN High-Density Mini D-sub 15 Pin G with sync 1.0 Vp-p (75-ohm)
G without sync 0.7 Vp-p (75-ohm)
B: 0.7 Vp-p (75-ohm)
R: 0.7 Vp-p (75-ohm)
HD / VD:1.0 - 5.0 Vp-p (high impedance)
AUDIO Stereo mini jack (M3) 1 0.5 Vrms, Shared with DVI-D IN
LAN
RJ45 10BASE-T/100BASE-TX, compatible with PJLink
TM
SERIAL External Control Terminal
D-sub 9 Pin RS-232C compatible
AUDIO OUT Stereo mini jack (M3) 1 0.5 Vrms
Output level: Variable (-
0 dB)
[INPUT 1 kHz / 0 dB, 10 k ohm Load]
CHARGE 5 V/500 mA
Accessories Supply
Remote Control Transmitter N2QAYB000691
Batteries R6 (UM3) Size 2
Dimensions (W H D) 44.4 inch (1,126 mm) 25.7 inch (652 mm) 2.1 inch (53 mm)
Mass (weight) approx. 31.97 lbs (14.5 kg)
Notes:
Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.

Related product manuals