Panasonic TH-55AF1U - COMPONENT;RGB in Terminal Connection; SERIAL Terminal Connection

25
English
COMPONENT/RGB IN terminal
connection
Note
●
Video equipment, cables and conversion adapter
shown are not supplied with this unit.
●
For audio, it is also possible to use AUDIO1 IN
terminal input. (For [Audio input select] function, see
page 92.)
G/Y/VIDEO
B/P
B/CB
R/PR/CR
AUDIO2 IN COMPONENT/RGB/VIDEO IN
R LPRPBY
Stereo mini
plug (M3)
Shared with VIDEO IN.
Video pin cable (commercially available)
Pin-BNC conversion plug (commercially available)
Stereo audio cable (commercially available)
DVD Player
RGB camera
Note
●
In accordance with the input signal connected to
COMPONENT/RGB IN terminal, select the input
[Component] or [RGB] in [Signal] - [Component/RGB-
in select]. (see page 78)
●
The RGB signal input to COMPONENT/RGB IN
terminal corresponds to “SYNC ON G” only.
SERIAL terminal connection
The SERIAL terminal conforms to the RS-232C interface
specification, so that the Display can be controlled by a
computer which is connected to this terminal.
SERIAL
OUT
SERIAL
IN
D-sub 9p
(Female)
(Male)
RS-232C Straight cable (commercially available)
PC
Note
●
Use the RS-232C straight cable to connect the
computer to the Display.
●
Additional computer and cables shown are not
supplied with this set.