55
[Settings] application
Android standard application. Select the [Settings] button icon on the [TOOLS] screen to display the [Settings] screen.
Note
●
Some functions are not available on this unit.
Make various settings for Android OS.
Select the setting item and press <ENTER> to display the setting screen.
Scroll the screen to display the following items.
■ [WIRELESS & NETWORKS]
Make various settings for network.
This can be set by selecting [SETUP] - [WIRELESS & NETWORKS] as well. (see page 46)
[Wi-Fi]
To enable the Wi-Fi function, set the [OFF/ON] button to [ON].
The access point list in your area is displayed. Selecting the connection destination displays the security password
setting dialogue.
[Password]: Enter the password.
[Show password]: Displays the input password when a check mark is added to the check box.
[Show advanced options]: Displays [Proxy] and [IP settings] when a check mark is added to the check box.
[Connect]: Connects to the selected access point.
[Cancel]: Cancels the connection, and returns to the access point list display.
[Proxy]:
[None]: The proxy is not set.
[Manual]: The proxy is set manually.
[Proxy hostname]: Sets the host name of proxy.
[Proxy port]: Sets the port number of proxy.
[Bypass proxy for]: Sets the domain that does not use the proxy.
[IP settings]:
[DHCP]: Acquires the IP address automatically if a DHCP server is present on the network where
the display is connected.
[Static]: Sets the IP address manually if a DHCP server is not present on the network where the
display is connected.
[IP address]: Sets the IP address if a DHCP server is not used.
[Gateway]: Sets the gateway address if a DHCP server is not used.
[Network prefix length]: Sets the network prefix length if a DHCP server is not used.
[DNS 1]: Sets the priority DNS server address if a DHCP server is not used.
[DNS 2]: Sets the substitute DNS server address if a DHCP server is not used.
[WPS Push Button]
Use this when connecting to the access point device compatible with WPS.
Selecting [WPS Push Button] will make the access point device enter the WPS button standby mode.
For operation of the access point device, read the operating instructions supplied with the device.
To Next Page
Loading...
