46
[SETUP] screen of OpenPort PLATFORM
Select the [SETUP] button icon on the home screen to display the [SETUP] application screen.
Set [WIRELESS & NETWORKS], [Language & input] and [Date & time settings].
Select the item with and press <ENTER>.
Switches to the setting screen of the selected item.
Returns to the [SETUP] screen with <BACK>.
[WIRELESS &
NETWORKS]:
Make various settings for network.
It is also possible to set in [TOOLS] - [Settings] - [WIRELESS & NETWORKS]. (see page 55)
Make this setting before using the network.
[Language & input]: Sets the language to use, input method, etc.
It is also possible to set in [TOOLS] - [Settings] - [Language & input]. (see page 58)
[Date & time settings]: Sets the date and time.
It is also possible to set in [TOOLS] - [Settings] - [Date & time]. (see page 59)
Note
●
If connected to the network, the date and time can be automatically set. However, it will be required to set the time
zone. Set manually. (see page 59)
●
If not connected to the network, set the date and time manually. (Use a USB mouse for setting.)
●
If the clock shows wrong time soon after set to the right time, replace the battery inside the unit. Consult the dealer
where you purchased the product.
●
In the network condition where both the wired LAN and wireless LAN operate, the wired LAN is prioritized for
operation. When using the wireless LAN, disconnect the wired LAN cable.
To Next Page
Loading...
