Panasonic TH-55AF1U - Setup menu; Signal Input Configuration

English
78
Setup menu
1
Press <SETUP> to display the [Setup]
menu.
1/2
Setup
Signal
Screensaver
Input label
Power management settings
Wobbling
No activity power off
OSD language
Off
Disable
English(UK)
OpenPort PLATFORM standby
Off
2/2
20
Setup
Multi display settings
Landscape
USB media player settings
Function button settings
Display orientation
OSD position
Menu display duration
Menu transparency
Right
60 sec
Set up timer
2
Select the item to set with .
●
Menu that cannot be adjusted is greyed out.
Adjustable menu changes depending on signal,
input and menu setting.
3
Set with .
4
Press <SETUP> to exit from adjust
mode.
■ To return to the previous screen
Press <RETURN>.
Signal
Examples of [Signal] submenu screen
When OpenPort PLATFORM is selected
Signal
Noise reduction
MPEG noise reduction
Auto
Off
Dynamic backlight control Off
When HDMI / DVI is selected
60.00 Hz
74.18 MHz
1125(1080)/60i
33.72 kHz
Signal
Cinema reality
YUV/RGB-in select
Noise reduction
Signal range
MPEG noise reduction
Dynamic backlight control
V-freq.
H-freq.
Dot clock freq.
Signal format
Off
YUV
Auto
Full(0-255)
Off
Off
When PC is selected
60.00 Hz
74.18 MHz
1125(1080)/60i
33.72 kHz
0
Signal
Component/RGB-in select
Sync
Cinema reality
XGA mode
V-freq.
H-freq.
Dot clock freq.
Input level
Signal format
RGB
Auto
Off
Auto
Dynamic backlight control
Off
MPEG noise reduction
Noise reduction
Off
Auto
When COMPONENT / RGB is selected
60.00 Hz
74.18 MHz
1125(1080)/60i
33.72 kHz
0
Signal
Component/RGB-in select
Cinema reality
MPEG noise reduction
XGA mode
Noise reduction
Input level
H-freq.
V-freq.
Dot clock freq.
Signal format
Component
Off
Off
Auto
Auto
Dynamic backlight control
Off
When VIDEO is selected
59.94 Hz
-- MHz
NTSC
15.73 kHz
0
Signal
3D Y/C filter
Colour system
MPEG noise reduction
Cinema reality
Input level
Noise reduction
H-freq.
Off
Auto
Off
Off
Auto
V-freq.
Dot clock freq.
Signal format
Dynamic backlight control Off
When USB is selected
Signal
Noise reduction
MPEG noise reduction
Auto
Off
Note
●
[Signal] setup menu displays a different setting
condition for each input signal.
●
Menu that cannot be adjusted is greyed out.
■ [Component/RGB-in select]
This menu is displayed at PC IN and COMPONENT/
RGB IN inputs.
Select to match the signals from the source
connected to each terminal.